Lamp was made around the 70s. Wooden base measures 9 7/8 inches wide x 3 inches x 1 3/8 inch. The added height to the back of base makes total height of base 5.25 inches.
Height of copper tubing (used for cord) to base of light bulb socket is 13.25 inches.
Cast iron pheasant measures 4.5 inches from break to top of tail.
Cast iron rifle measures 8.75 inches long. Can’t find maker markings on cast iron. It is from PA so I’m guessing either Hubley or John Wright.
The cord & light socket were replaced. The cord is 74.5 inches from base of lamp to the plug…just before the prongs.
The lamp socket is for a 3 way bulb. The pheasant is a little loose, but can be tightened from bottom by removing felt. Original felt. It was glued back into place where part of it was loose. The lamp shade included. Original shade that came with lamp was basic cylinder shade…discolored and broken.
Please note I am not sure if the chat is working. Tried it a few weeks ago & it didn't send me notifications. If you don't hear back from me please use email relay.
Unable to respond to messages between hrs of 8pm-8am.
Please know I will respond ASAP.